Step by step StrikePack Guide

This guide will step-by-step help you set-up your first Warzone LED slot on the Collective Minds Strike Pack.

Step 1. The software and programs.
– Windows PC (Windows 7 operating system or higher required) – I use macOS.
– Mod Central [v1.4.0]
– Micro USB Cable (The one supplied with the Strike Pack works best)
That’s it!

Step 2. Getting started with Mod Central – Controller
– Connect your Strike Pack via the Micro USB Cable (if you haven’t already done this)
Note: If your Strike Pack is still connected to the DualShock controller you must hold both paddles in while connecting. – –

  • Connect your Strike Pack via the Micro USB Cable (if you haven’t already done this)
    Note: If your Strike Pack is still connected to the DualShock controller you must hold both paddles in while connecting.
  • Launch Mod Central and open the Controller window
  • Enable “Disable Rumble” and “Mirror Advanced Settings” then click the “Save Settings to StrikePack” button.

Note: For Weapon AI and Quick Edit vibration must be enabled In-game and via [Settings] > [Devices] > [Controllers]. Make sure there is a check mark in the [Enable Vibration function] setting.

Step 3. Getting started with Mod Central – ModPacks

  • Connect your Strike Pack via the Micro USB Cable (if you haven’t already done this)
    Note: If your Strike Pack is still connected to the DualShock controller you must hold both paddles in while connecting.
  • Launch Mod Central and open the Open Available ModPacks icon window (top right)
  • In the F slot select FPS CODE STANDARD PS4 (v2.0.2) (If the Mod Configurator window opens – just close this.

Step 4. Setting up LED 1

  • In the slot 1 select Call of Duty Warzone (v1.6.0)
    Note: 1 = LED one from the left side
  • The Mod Configurator will open, and it’s time to begin!
  • Fill in the following fields all must be matching your in-game settings:
    • Button Layout
    • Stick Layout
    • Stick Sensitivity
    • Aim Response Curve
    • Deadzone
  • For Global Mods: Select 12: HT, TM, SC – (Hair Triggers), (Turbo Melee), (Slide Cancel)
  • For Anti-Recoil Mode: Select ADS Anti-Recoil – Quick Edit
  • For Aim Assist: Intensity choose between 14-16 if you’re running Optic or 16-18 if Iron Sight
  • For Aim Assist: Drift Correction Degree and Aim Assist: Drift Correction Strength leave them both on zero (Unless you’ve stick-drift)
  • For Profile Switch Mode select Weapon Swap on Xbox and PC and Weapon Swap (PS4 Solid Lightbar) on PlayStation For Weapon Profile Features select All Enabled

    Now, it’s time to assign your in-game class options!

Step 5. Setting up Primary Weapon

  • For CLASS 1: PRIMARY WEAPON select your in-game primary weapon (Adding – Ext Mags when used)
    For the purpose of this guide we’ll be setting up an ASSAULT RIFLES: CR-56 AMAX – Ext Mags as our primary weapon.
  • For PRIMARY ANTI-RECOIL STRENGTH (%) select a strength and modify this until you’re comfortable
    For the purpose of this guide we’ll be setting up a strength of 103% on our primary weapon.
    Tip: You can get anti-recoil strengths from our Downloads page.
  • For: CLASS 1: PRIMARY ADS MOD select 1: Aim Assist
  • For: PRIMARY AIM ASSIST MODE select Aim Assist – NOT Aim Assist+
  • For: CLASS 3: PRIMARY FIRE MOD select Disabled

Step 6. Setting up Secondary Weapon

  • For CLASS 4: SECONDARY WEAPON select your in-game secondary weapon (Adding – Ext Mags when used)
    For the purpose of this guide we’ll be setting up an SMGS: MP5 as our secondary weapon.
  • For SECONDARY ANTI-RECOIL STRENGTH (%) select a strength and modify this until you’re comfortable
    For the purpose of this guide we’ll be setting up a strength of 97% on our secondary weapon.
    Tip: You can get anti-recoil strengths from our Downloads page.
  • For: CLASS 5: SECONDARY ADS MOD select 1: Aim Assist
  • For: SECONDARY AIM ASSIST MODE select Aim Assist – NOT Aim Assist+
  • For: CLASS 6: SECONDARY FIRE MOD select Disabled

Step 7. Setting up Paddles

There is no right or wrong answer as for what you should use your paddles for.

The most common usage is slide cancelling and hop shot. However, you can use whatever.

If you wish to assign these buttons as other actions (not Mods) such as Square or Circle select Disabled and Save.

  • For CLASS 7: LEFT PADDLE / BUTTON #1 MOD select your ideal shortcut
    For the purpose of this guide we’ll be setting up 17: Slide Cancel as our left paddle mod.
  • For CLASS 8: RIGHT PADDLE / BUTTON #2 MOD select your ideal shortcut
    For the purpose of this guide we’ll be setting up 10: Hop Shot as our right paddle mod.
  • Skip everything else and click the SAVE CONFIGURATION button

You’re finished! Click the SAVE SLOTS TO DEVICE button.

Step 8. Enter a Warzone match!

Once you’re in a Warzone game and have purchased (or used the free) Loadout Drop select the primary and secondary loadout you just setup above.

For the purpose of this guide we set up an CR-56 AMAX (AR) and an MP5 (SMG) so we’ll choose our Overkilled AMAX/MP5 loadout option.

At the very begiaing we set-up LED 1 so we’ll select that LED via holding the left squared button on our StrikePack and tapping the right paddle once. LED 1 (left) should now be Blue.

That’s it! Play the game as normal. Remember, if you die and respawn you’ll need to disable this LED [holding the left squared button on our StrikePack and tapping the right squared button once] until you get your loadout again, if it’s safe and you returned to your loot – leave this enabled and play on.

You can now setup other loadouts the same way (just change each primary and secondary and it’s recoil and strength values).

You can have a maximum of 4 LEDs when using Warzone pack due to file size and limits. A Cronus Zen allows 6 slots.

Is you ready? Whole squad ready!


This guide was written with a DualShock v2 Controller using Mod Central [v1.4.0] and the ModPass Warzone Pack [v1.6.0] with a CR-56 AMAX and MP5 playing with a 20-20 stick sensitivity. We assume it to work the same for Xbox (other than button names etc) and other DualShock controllers.